1. The range of materials that can be pressed is very wide. All kinds of iron powder, magnesium powder, mineral powder, iron oxide scale, steel slag, refractory materials, etc. can be pressed and formed by this machine.

 

 2. All indexes of Velite Magnesium Ball Press have reached the standard and have been unanimously recognized by users. People from all walks of life are welcome to visit and inspect the factory!     

 

 3. Weilit Machinery has strong technical support, advanced process configuration, strong technical force, fine processing, complete testing equipment, and all-round protection of the process quality and scientific content of the magnesium powder ball press equipment.

 

1. The feeding part is mainly to realize quantitative feeding to ensure that the material evenly enters the roller room. If the feeding amount is too large, the electric power of the feeding device will be overloaded; if the feeding amount is too small, the ball will not be formed. Therefore, skilled operation skills are an important condition to ensure the normal work of the pressure ball. 　

 

2. In the transmission part, the main transmission system is: motor-triangle belt-reducer-open gear-roller.　 　    

 

3. The forming part mainly refers to the main machine part, and the core part is the roll. This machine can adjust the pressure according to the requirements of the pressure ball density, and the production is flexible and flexible.

 

Molding

 

       Raw material---Feeder (vibrating screen)---Crusher----Batching machine--Double-shaft mixer---Wheel mill---Feeder—Mg powder ball press---Dryer- ---Finished product warehouse (the specific equipment composition depends on the actual production situation)

 

device installation

 

       Before the installation of the magnesium powder ball press, the pipeline should be laid in strict accordance with the electrical specifications, and the strong and weak signal lines should be isolated and laid to avoid interference. In an open outdoor environment, independent external lightning protection measures should be taken. The dome camera itself should also be well grounded to prevent static electricity accumulation from affecting the dome camera. Correctly connect the power cord, communication cable and video cable during installation. When connecting, carefully refer to the requirements of the installation instructions to confirm the communication mode and corresponding pin definitions. Generally, the equipment should be installed in the later stage of construction to avoid a large amount of dust on the construction site from invading the ball machine, which directly affects its use effect and durability. Pay attention to the debugging of the equipment after installation.

 

 Finished spherical

 

       Magnesium powder ball press can produce a variety of spherical shapes, such as square shape, ball-egg shape, round shape, goose-egg shape, pillow shape, etc., for users to choose from. The special ball press sphere can be defined by our company according to the needs of users. The finished product sample is shown in the figure below: