The wide application of hydraulic ball press solves the problem of waste disposal

Update time : 2021-09-22Publisher：fuwoliqiang

Industrial and mining enterprises will produce a large amount of waste residue during the production process. Due to the long-term failure to obtain reasonable disposal, the piles not only waste land resources, but also seriously pollute the environment. The wide application of hydraulic ball press has solved these waste disposal problems, turning waste into treasure and increasing economic benefits, realizing the sustainable development of the enterprise.

  The size and nature of the working load of the hydraulic ball press have an important influence on the loss process of the machinery. Generally speaking, the wear of parts increases in proportion to the increase in load. When the load on the part is higher than the average design load, its wear will increase. In addition, when other conditions are the same, stable load has less wear than dynamic load, fewer failures, and lower life.

    To ensure the normal working load of the hydraulic ball press mainly depends on the operator's use of the ball press. First, pay attention not to work under a larger load than the machine can withstand, and to use the machine within the capacity. As the manager of the ball press, when appointing the operator, you should hand over the random information and operation manual of the ball press to the operator so that they can master the mechanical properties and operating procedures normally, and should not buckle down the relevant information at will . Second, we must try our best to ensure the uniform increase and decrease of the mechanical load, so that the machine is in a relatively smooth load change. Specifically, it is to increase and decrease the throttle more evenly to prevent the engine and the working device from moving up and down.

    The pressure roller is an important part of the hydraulic ball press. It directly contacts the material and uses strong pressure to press the material into a ball. If the material of the hydraulic ball press contains high hardness impurities such as metals, the roller skin will be damaged. The manufacturer of the hydraulic ball press recommends that customers of the hydraulic ball press install an iron remover to solve this problem, which can remove all kinds of impurities contained in the raw materials and ensure that the hydraulic ball press will not adversely affect the press roller during the forming process .

    The slag ball press, hydraulic ball press, desulfurization gypsum ball press, and briquette ball press produced by the ball press machine are of high quality, good adaptability, strong working ability and reasonable price. Customers are welcome to bring raw materials to the factory for pressure testing. The ball effect makes you satisfied.