The strength of the iron oxide ball press machine also depends on the use of the machine

Update time : 2021-09-22Publisher：fuwoliqiang

   The iron oxide scale ball press is used to extrude powder materials to increase its density and strength, and the pressed products are mainly used for combustion and smelting. After pressing the desulfurized gypsum into a ball, the strength is ensured, the load is not destroyed, and the boiler is not broken during combustion, which greatly improves the combustion value. Then the strength of the ball mainly depends on the quantity and correct use of the adhesive, as well as the particularity of the material. The other is the size of the ball socket and the depth of the ball socket.

    The iron oxide ball press machine is mainly used to compress powder materials that are difficult to form. It is characterized by high forming pressure, adjustable number of hosts, and screw feeding device. The actual density of the material can be increased by 1-3 times during the ball pressing process of the iron oxide ball press, so as to meet certain strength requirements. It is not only suitable for industrial gasification, boiler briquette, cold-pressed coke, ignition briquette, civil briquette, but also suitable for civil metallurgy, refractory materials, medicine and other materials.

    The shape and size of the ball sockets of different types of iron oxide ball presses vary from material to material to meet various requirements. For the desulfurized gypsum ball press, small and medium-sized ball sockets should be selected, and the diameter of the pellets should also be 3-5 cm. Because of the moisture in the desulfurized gypsum when the ball is pressed, the ball is wet. If the water is slightly larger, it can be pre-compressed with a compactor.

    For the iron oxide ball press, the flat ball type must be selected, the ball socket is small and very shallow. The main reason is that no adhesive is allowed when drying the raw material of the iron oxide sheet pressing ball mechanism. If deep sockets and large sockets are used, the ball formation rate is not high. It is even difficult to shape.

For the iron oxide scale ball press machine and the iron powder oxide scale ball press machine, large ball sockets should be selected as much as possible, and the ball sockets should be set to be spherical. As long as the humidity of the material and the amount of binder are controlled, the finished ball can be pressed out. The output is as high as 95%, and the ball strength is very good. If you can't do it once, you can try to press the ball twice to ensure ball speed and strength.

    The above materials are common materials. The strength of the iron scale ball press machine not only depends on the adhesive, but also depends on the use of the machine, so the choice of the machine and the choice of the iron scale ball press socket are very important.